Replacement Lock and Key for Brand Imports Sticker Tattoo Machine Vending 2 Column Or 4 Column
These are made for Brand Imports 2 Column and 4 Column Machines. Check out the pictures of machine to make sure you have this type of machine.
Brand used a single lock on their 2 column machines and 2 screw locks on the back of their 4 column machines. Buy quantity 2 if you need both of them and we will send them as a matching set for you so that one key can open both locks.
The best way to tell if your machine is a Brand is to look at the pictures to compare to what you have.
Identifier for their 2 column is the thin red trim strip at the top. This machine is unique because that strip comes off when you unlock the machine.
For the 4 columns, look at the trim piece on the front of your machine. The trim piece separates the top plastic from the bottom and there are nuts INSIDE your machine to remove that piece. There are other machines that look similar but the screws to remove the trim piece are on the outside of the machine.
NOTE: This set will NOT open the locks to your machine. You must remove those first and then install these. To remove the old locks just drill them out.
The machines in the pictures are there so you can verify that it is the type you have. They are not included. Check out our store for everything bulk vending related that you can imagine.
